Event ID code | Cause and solution | |
0483 | The EasyMP Network Projection program quit unexpectedly. Check the network | |
| communication status, then turn the projector off and then on again. | |
04FE | ||
| ||
0479 | A projector system error has occurred. Turn the projector off and then on again. | |
04FF |
| |
0891 | Cannot find an access point with the same SSID. Set your computer, access point, | |
| and projector to the same SSID. | |
0892 | The WPA/WPA2 authentication type does not match. Make sure the wireless | |
| network security settings are correct. | |
0893 | The WEP/TKIP/AES encryption type does not match. Make sure the wireless | |
| network security settings are correct. | |
0894 | Communication with unauthorized access point was disconnected. Contact your | |
| network administrator. | |
0898 | Failed to acquire DHCP address. Make sure the DHCP server is operating correctly. | |
| If you are not using DHCP, turn off the DHCP setting in the Network menus. | |
0899 | A communication error has occurred. Try restarting the EasyMP Network Projection | |
| program and restarting your projector. If that does not solve the problem, contact | |
| Epson for help. |
Parent topic: Projector Information Display - Info Menu
132
