Power light | Status light | Lamp light | Temp light | Status and solution |
Off | Flashing blue | Off | Orange | Projector has overheated and |
|
|
|
| turned off. Leave it turned off to |
|
|
|
| cool down. Once the Temp and |
|
|
|
| Status lights turn off and the power |
|
|
|
| light turns blue (after about five |
|
|
|
| minutes), try the suggestions |
|
|
|
| below: |
|
|
|
| • Make sure that the vents and air |
|
|
|
| filter are not clogged with dust or |
|
|
|
| obstructed by nearby objects. |
|
|
|
| • Clean or replace the air filter. |
|
|
|
| • If operating the projector at high |
|
|
|
| altitude, turn on High Altitude |
|
|
|
| Mode. |
|
|
|
| • If the problem persists, unplug |
|
|
|
| the projector and contact Epson |
|
|
|
| for help. |
Off | Flashing blue | Orange | Off | Lamp has a problem. |
|
|
|
| • Check to see if the lamp is |
|
|
|
| burned out, broken, or installed |
|
|
|
| incorrectly. Reseat or replace the |
|
|
|
| lamp as necessary. |
|
|
|
| • Clean or replace the air filter. |
|
|
|
| • If operating the projector at high |
|
|
|
| altitude, turn on High Altitude |
|
|
|
| Mode. |
|
|
|
| • If the problem persists, unplug |
|
|
|
| the projector and contact Epson |
|
|
|
| for help. |
Flashing blue | Light status | Flashing | Light status | Replace the lamp soon to avoid |
| varies | orange | varies | damage. Do not continue using the |
|
|
|
| projector. |
149
