Extron electronic DVS 304 AD, DVS 304 D manual

f). Click Take button to tie the DVS 304’s input to the selected switcher output. The program will create a custom script that will then be loaded onto the DVS 304. The Status box updates with the status of the script on the DVS 304, showing if the DVS 304’s script is connected to the matrix switcher, and showing the current tie associated with output selected.

Using the DVS and matrix switcher after the DVS is synchronized to the matrix switcher.

After completing step 4, above, ensure the following is done when using the DVS with the matrix:

•Perform all input switching using the matrix switcher. A 1-second RGB delay on the matrix is recommended to minimize the appearance of a glitch in the output while the DVS locks onto the new signal.

•The DVS senses when the matrix switcher changes input ties and recalls the matching input preset, so Input presets need not be recalled manually.

•The DVS 304 and the matrix switcher must remain on the same subnet.

Do not change the matrix switcher’s IP address. If the IP address of the matrix is altered, repeat step 4 above.

DVS 304 • Installation and Operation 2-27