Extron electronic DVS 304 D, DVS 304 AD manual Command, ASCII Telnet, URL Encoded Web, Response

Command	ASCII (Telnet)	URL Encoded (Web)	Response	Additional description
	(host to processor)	(host to processor)	(processor to host)

IP setup commands, continued

Set Verbose mode24 E X2@CV} W X2@CV VrbX2@] Set verbose mode.

NThe processor can send out unsolicited information (such as notice of a volume or input change or a change in some other setting). That is called verbose (wordy) relationship between the processor and a connected device. For a direct RS-232/422 connection, the processor is set for Verbose mode by default. When the DVS 304 is connected via Ethernet, Verbose mode is disabled by default in order to reduce the amount of communication traffic on the network. If you want to use the Verbose mode with a processor connected via Ethernet, this mode must be set to On each time you reconnect to the processor..

Read verbose mode	ECV}	WCV	X2@]
Read connection’s security	ECK}	WCK	X5@]
level

Re-map port designations

DVS 304 • Serial

Set Telnet port map 24 Reset Telnet port map 24 Disable Telnet port map 24 Read Telnet port map Set Web port map 24 Reset Web port map 24 Disable Web port map 24 Read Web port map 24

Set Direct Access port map 24 Reset Direct Access port map 24 Disable Direct Access port map 24 Read Direct Access port map 24

E{port #}MT}	W{port #}MT	Pmt{port #}]
E23MT}	W23MT	Pmt00023]
E0MT}	W0MT	Pmt00000]
EMT}	WMT	{port #}]
E{port #}MH}	W{port #}MH	Pmh{port #}]
E80MH}	W80MH	Pmh00080]
E0MH}	W0MH	Pmh00000]
EMH}	WMH	{port #}]
E{port #}MD}	W{port #}MD	Pmd{port #}]
E2001MD}	W2001MD	Pmt02001]
E0MD}	W0MD	Pmd00000]
EMD}	WMD	{port #}]

Communication 3-21

NX2@ = Verbose/Response Mode (Default = 0 for Telnet connections; 1 for RS-232 host control).

0 = clear/none, 1 = verbose mode, 2 = tagged responses for queries, 3 = verbose mode and tagged responses for queries

If tagged responses is enabled, all read commands will return the constant string + the data, like setting the value does (e.g. command: Esc CN } response: Ipn• x12]). X5@ = Connection’s security level: 0 = anonymous, 1 – 10=extended security levels 1 thru 10, 11 = user, 12 = administrator