Extron electronic DVS 304 AD, DVS 304 D manual Start Auto Image menu, Input Configuration menu

Start Auto Image menu

Default Cycle

2 sec.

INPUT 1	2 sec.	OUTPUT	MENU
COMPOSITE		1024 x 768@60
			NEXT

START AUTO IMAGE ON IN1

PRESS NEXT TO START

NEXT

Input Configuration menu

START AUTO
IMAGE ON IN1
MENU
INPUT	NEXT
CONFIG

Input 1 can only accept composite video. Input 3 can only accept S-video. Only Inputs 2 and 4 can be configured for different video types, although an SDI input can be assigned to any input.

INPUT 2

YUVi

Select video format

•Composite

•S-video

•YUVi

•YUVp

•YUV Auto

NEXT	INPUT 4
	RGB SCALED
	Select video format

•Composite

•S-video

•RGBcvS

•YUVi

•YUVp

•RGB scaled

•RGB pass

•Auto detect

		Displays only when applicable		Displays only when applicable
NEXT		SDI INPUT	NEXT		SDI DE-INTER	NEXT
	<*> 1 2 3 4				FIELD STNDRD

Assign SDI to Input #

• 1, 2, 3, 4, * (none)

NThe SDI input signal can be NSDI De-interlacing options:

assigned to any input. Once	•	Field Standard
assigned to a specific input,	•	Field Flip
only an SDI signal can be
accepted on that input. SDI
can be disabled by
selecting the *.

ASPECT RATIO

4x3

Aspect ratio options

•4 x 3

•16 x 9

NEXT

Displays only when applicable Displays only when applicable

NEXT

FILM MODE	NEXT	H ACTIVE V		NEXT	H START	V	NEXT	TTLPIX PHASE
<OFF> ON		XXX	XXX		50	33		XXXX	08
									For YUVp or RGB input only
Film mode		Horizontal	Vertical active		Horizontal start	Vertical start		Total pixels	Pixel phase
Turn On or Off for low		active pixels	lines		Select for the	Select for the		Specify the	Adjust the pixel
resolution devices.		Specify the	Specify the		left edge of the	top edge of the		width in pixels of	sampling point
Not for use with		width in pixels	height in lines of		active video.	active video.		the total image	for a selected
		of the active	the active image					area sampled.	input.
YUVp or RGB
		image area	area sampled.
inputs.
		sampled.

Picture Control

INPUT

CONFIG

MENU	Tint adjustment applicable only for
	NTSC composite or S-Video inputs

PICTURE CONTROL

NEXT

H POS

V

NEXT

H SIZE

V

NEXT

BRIGHT CONT

NEXT

COLOR

TINT

NEXT

000

000

1024

768

064

064

064

064

Horizontal

Vertical

Horizontal

Vertical

Brightness

Contrast

Color

Tint

position

position

Adjust image Adjust image

Adjust color Adjust tint

sizing

sizing

Adjust

Adjust

Adjust

Adjust

brightness.

contrast.

of image.

of image.

horizontal

vertical

horizontal

vertical

image

image

image

image

position.

position.

sizing.

sizing.

Only applicable when zoom is over 100 %

NEXT

H	PAN V	NEXT
000	000

Pan

Move the “zoomed” image horizontally or vertically. Available only when zoom is set over 100%.

ZOOM	NEXT
100%

Zoom

Allows for 100-200% zoom while the aspect ratio remains unchanged.

DETAIL 064

Detail

Adjust sharpness of the image.

DVS 304 • Menu System A-3