Installing the Ribbon Cartridge

EPSON recommends the use of genuine EPSON ribbon cartridges (#8750 for the FX-880+, #8755 for the FX-1180+). Products not manufactured by EPSON may cause damage to your printer that is not covered by EPSON’s warranties.

wWarning:

You need to move the print head by hand to install the ribbon cartridge. If you have just used the printer, the print head may be hot; let it cool for a few minutes before touching it.

1.Make sure the printer is turned off. If it is connected to an electrical outlet, unplug it from the outlet.

The printer is off when the power switch is pressed down to the N side.

2. Open the printer cover, then pull it up to remove it.

Setting Up the Printer

1-3