cCaution:Never use the knob to adjust the tear-off position; this may damage the printer or cause it to lose the tear-off position.

1.You may need to press the Tear Off/Bin button to advance the paper to the tear-off position. Make sure the Tear Off/Bin light is flashing (the paper is at the current tear-off position).

2.Hold down the Pause button for about three seconds. The Pause light begins flashing and the printer enters the Micro Adjust mode.

3.Press the LF/FF D button to feed paper backward, or press the Load/Eject U button to feed paper forward, until the paper perforation is aligned with the tear-off edge of the printer cover.

tear-off edge of the printer cover

paper perforation

2-28Paper Handling