4.Press the LF/FF D button to move the top-of-form position up on the page, or press the Load/Eject U button to move the top-of-form position down on the page.

5.Press the Pause button to exit the Micro Adjust mode.

Note:

❏The printer has a minimum and a maximum top-of-form position. If you try to adjust it beyond these limits, the printer beeps and stops moving the paper.

❏When the paper reaches the default top-of-form position, the printer beeps and stops moving the paper briefly. You can use this setting as a reference point when adjusting the position.

❏The top margin setting made in some software overrides the top-of-form position setting you make with the Micro Adjust function.

2-30Paper Handling