7.Close the sprocket covers.
8.Slide the right sprocket to remove any slack in the paper; then lock it in place by pushing the sprocket lock down.
9.Attach the front cover with the continuous paper positioned as shown below.
10.Make sure the paper guide is lying flat on the printer and the edge guides are open all the way to the left and right. Then raise the continuous paper support.
11.Turn on the printer. When the printer receives data, it automatically loads the paper and starts printing.
If the first line on your page appears too high or low, you can change its position by using the Micro Adjust function as described on page
cCaution:Never use the knob to adjust the
Paper Handling |