The default settings (shown in bold) are consistent with Okidata Microline 320 Turbo factory settings.
Note:
Because the ML 320T does not have a
If you want to use your printer in Okidata mode, do not install the Windows® driver that came with your
If you have been using an Okidata printer, you may want to print out its default settings for reference before changing modes on the
To enter Okidata mode, make sure the printer is turned off. Then hold down the Tear Off/Bin and Pause buttons while you turn on the printer. The printer beeps once to indicate it is now in Okidata mode.
The printer remains in Okidata mode until you repeat the above procedure. To return to
Note:
When you switch from one mode to the other, any changes you made to the printer’s settings in the original mode are restored to their default values. You can print the default settings for the printer when it is in Okidata mode to check the current settings and change them if necessary. See “Changing default settings” on page