For Windows

Follow the steps below to install the printer software in Windows Me, 98, 95, 2000, or NT 4.0.

Note:

❏Installing the printer software for Windows 2000 or NT 4.0 may require administrator privileges. If you have problems, ask your administrator for more information.

❏If you want to make a floppy disk version of the printer software on your CD-ROM, insert the CD and run SETUP.EXE. In the dialog box that appears, double-click Create Floppy based printer driver/utility disks and follow the on-screen instructions.

❏If you are using the floppy disk version of the EPSON software, make a backup copy of the EPSON printer software disk or disks before you begin installation.

❏If the New Hardware Found screen or any other wizard appears when you turn on your computer, click Cancel.

❏If the Digital Signature Not Found screen appears, click Yes. If you click No, you must reinstall the printer driver.

1.Make sure Windows Me, 98, 95, 2000, or NT 4.0 is running and the printer is turned off.

2.Insert the printer software CD-ROM into the CD-ROM

drive. The Install dialog box appears. If it does not, double-click theMy Computer icon. Click the CD-ROM icon, then double-click SETUP.EXE.

(If you are using a floppy disk, insert the disk into the floppy disk drive. Double-click the floppy disk drive icon and then double-click the FD_SETUP.EXE icon.)

3.Click Install to start the printer software installation.

4.Select your printer from the list, then follow the instructions on the screen.

Setting Up the Printer 1-13