Micro Adjust

Locked

 

 

Font

Locked

 

 

Pitch

Locked

 

 

Pause

Unlocked

 

 

Reset

Locked

 

 

1.Make sure paper is loaded and the printer is turned off.

2.Turn on the printer while holding down the LF/FF and Pause buttons. The printer enters the Lock-out setting mode and prints the instructions. (You’ll need three sheets of A4 or letter size single-sheet paper or three pages of continuous paper that is at least 279 mm [11 inches] long and 210 mm [8.3 inches] wide.)

3.Follow the instructions to change the settings as desired.

4.Turn off the printer.

See “Turning Lock-out mode on and off” on page 3-10 for instructions on how to turn on Lock-out mode after you change the Lock-out mode setting.

Emulating the Okidata Microline 320 Turbo

If you have the EPSON FX-880+, you can make it work like the Okidata® Microline® 320 Turbo by turning the printer on in a different mode. In Okidata mode, the printer emulates Okidata functions, and the following additional settings can be selected in the default setting mode:

Feature

Printer settings in Okidata mode

 

 

Software emulation

IBM PPDS, EPSON ESC/P, Oki ML 320T

 

 

Auto tear off wait time

0.5 second, 1 second, 2 seconds,

 

Others

 

 

Bottom margin

4.2 mm, 20 mm, 22 mm, 24 mm, Others

 

 

Line spacing (lines per inch)

6 LPI, 8 LPI

 

 

Paper out override

Off (No), On (Yes)

 

 

Using the Control Panel 3-11