3.If paper jams in the paper eject position, open the cover on the right

and slowly pull out the jammed paper as shown. (Be careful not to pull too hard or the paper may tear, making it more difficult to remove.)

4. If the paper tears, open the middle cover and remove the paper.

Changing the Document Feed Speed

When you scan using the automatic document feeder, you can select a document feed speed of Low and High. Under normal conditions, use the high speed mode. If you want to scan thick documents or reduce noise of an image, use the low speed mode.

To change the document feed speed, lift the ADF and locate the switch as shown. Slide the switch up for high speed, or down for low speed.

High

Low

Solving Problems 117