5.Select EPSON Scan Server. A check mark appears beside applications selected for installation.

If you want to deselect

Acrobat Reader or the GT-30000 Registration (as shown), click the application to clear the check mark. Then click OK.

Use EPSON TWAIN HS to scan from the EPSON GT-30000 connected to your computer. Only install EPSON TWAIN HS Network if you want to access a GT-30000 scanner connected to another computer.

6.If you’re installing EPSON TWAIN HS, follow the instructions on the screen. When you see the window on the right, make sure SCSI and GT-30000are selected under Scanner Selection.

If you’re installing EPSON TWAIN HS Network in order to use a GT-30000 scanner attached to another computer, you’ll see a window that asks for the Network Scanner Address (the scanner server’s IP address). Enter the IP address for the scanner server you want to connect to. See page 94 for instructions.

7.Click Test to check scanner operation. If the scanner is communicating with your computer, you see Status: Device Reader under Scanner Information. Click OK to close the window.

86 Network Scanning