8.Click Test to check the connection.
If the scanner software is installed correctly, you see Status: Device Ready under Scanner Information. Click OK to close the window.
You can test your scanner connection at any time.
9.When you see the Screen Calibration window, move the slider right or left until the stripes match as closely as possible. (The stripes will not match perfectly. The recommended setting is 1.8.) Then click OK.
The EPSON Screen Calibration Utility calibrates the preview image you see in your EPSON TWAIN HS driver to match your monitor settings.
10.Follow the instructions on the screen to install Acrobat Reader (if necessary).
You won’t need to change the screen calibration as long as you continue to use the same display. If you need to recalibrate your screen at a later time, open the EPSON TWAIN HS window by
Screen Calibration button at the bottom of the window to start the utility.
If you’re done installing software, restart your computer. If you want to install the ISIS driver, PixTools QuickScan, or Presto! PageManager, go to the next section.
48 Installing the Software