Epson GT-30000 Placing a Single Original Document

To load documents into the ADF, follow these steps:

1.Slide the edge guide all the way out.

2.Insert the document stack face up into the ADF until it meets resistance. Then move the right edge guide so it is flush with the right edge of your document.

3. Continue with the scanning procedure on page 58.

Placing a Single Original Document

Follow these steps to position a single page:

1.Raise the ADF and place your document face down on the document table.

2.Position the document so the horizontal and vertical edges are carefully aligned with the scales on the top and left side of the document table.

3.Close the ADF slowly. Be careful not to move the document.