If you’re done installing software, remove the EPSON GT-30000 Scanning Tools CD-ROM and restart your computer. Then follow the instructions in the next section to make sure your scanner is operating properly.

If you want to install the ISIS driver, PixTools QuickScan, or Presto! PageManager continue with the instructions under “Installing Additional Software” on page 49.

Testing the Scanner’s Operation (Windows 2000)

Follow these steps to test scanner operation:

1.Open the Windows Control Panel and double-click the Scanners and Cameras icon to open the Scanners and Cameras Properties window.

2.Make sure EPSON GT-30000 is selected, and then click the Properties button.

3.Click the Test Scanner or Camera button. If the scanner is operating properly, a Test Successful message displays. Click OK to close the message.

Device Ready appears next to Status.

4.Click OK to close the Properties window.

34 Installing the Software