Installing the Automatic Document Feeder
The automatic document feeder (ADF) automatically loads
The ADF is large and heavy. Clear a wide space around the scanner before installing the ADF. You may need to have someone help you unpack and lift it.
Make sure you have released the transportation lock before installing the ADF. For details, refer to page 13.
To install the ADF:
1.Make sure your scanner is turned off, then unplug the scanner’s power and interface cables, if necessary.
2.Insert the installation screws that came with the ADF into the holes in the back of the scanner and secure them with the enclosed screwdriver tool, as shown below.
3. Place the two knobs included with the ADF beside the scanner.
14 Setting Up Your Scanner