Setting Up Client Computers
To set up a client computer, you’ll need to know the IP address or host name of the scanner server. Also, make sure the TCP/IP protocol is installed. (See Appendix A, “Installing the TCP/IP Protocol,” for instructions.)
Installing EPSON TWAIN HS NetworkYou must install EPSON TWAIN HS Network on the client computer before the client can use the network scanner. At the same time, you can install other software that came with your scanner. Your scanner comes with a
The ISIS driver and PixTools QuickScan cannot be run over a network.
1.Insert the EPSON
2.Make sure English is selected and click OK. The Software Setup window appears.
92 Network Scanning