Installing the TCP/IP Protocol on Windows NT 4.0

1.Open the Control Panel and double-click the Network icon. If necessary, click the

Protocols tab.

2.Check that TCP/IP Protocol appears in the list of network protocols.

If it appears in the list, go to “Assigning an IP Address on Windows NT 4.0” on page 127.

If you don’t see TCP/IP Protocol in the list, continue with the next step.

3.Click the Add button. You see the screen on the right.

4.Select TCP/IP Protocol and click OK.

5.Continue with the instructions in the next section to assign an IP address.

126 Installing the TCP/IP Protocol