Connecting to an IEEE 1394 Scanner Interface

If you purchased the optional IEEE 1394 scanner interface card (B808342), follow the instructions in this section to install the interface card in your scanner and connect the scanner to your computer.

You can purchase genuine EPSON supplies and accessories from the EPSON Store™ at (800) 873-7766, or visit www.epsonstore.com (U.S. sales only). In Canada, please call (800) 873-7766 for dealer referral.

To use the IEEE 1394 scanner interface card, your PC must have an OHCI compliant port or card, and must be running a pre-installed version of Windows Me or Windows 2000.

IEEE 1394 Scanner Interface Card

IEEE 1394 Scanner Interface

 

Card Cable

Installing the IEEE 1394 Card in Your Scanner

Before you begin, turn off the scanner and disconnect the power cord and any cables.

1. Remove the two screws securing the shield plate to the scanner’s optional interface slot, and then remove the plate. Put the screws in a safe place in case you want to reinstall the shield plate later.

Static electricity can damage electronic components like the IEEE 1394 scanner interface card. To discharge static electricity, touch the scanner’s metal frame before handling the card.

Setting Up Your Scanner 21