Introduction

Note:

If you don’t have a CD-ROM drive, you can get the printer driver software on diskettes or download it through your modem. See your Getting Started guide for details.

◗At least 50MB of free hard disk space for storing images (100MB recommended)

◗VGA, Super VGA, or better display adapter and monitor

◗Double-speed CD-ROM drive (quad-speed or faster recommended)

◗A shielded, twisted-pair parallel printer cable (6 to 10 feet long) to connect your computer to the printer; the cable must have a D-SUB, 25-pin, male connector for your computer and a 36-pin, Centronics® compatible connector for the printer.

Macintosh System Requirements

To use your printer and its software with a Macintosh, your system should have:

◗Any Macintosh or Power Macintosh model except early models such as the Macintosh Classic, Macintosh +, Macintosh 512, or PowerBook™ 100

◗System 7.1 or later (7.5 or later recommended)

◗At least 16MB of built-in RAM (20MB recommended)

◗At least 50MB of free hard disk space for storing images (100MB recommended)

◗13-inch RGB or better display

◗Double-speed CD-ROM drive (quad-speed or faster recommended)

◗Standard Apple® System Peripheral-8 cable or equivalent (RS-422, 8-pin mini DIN male/male, Belkin F2V024 recommended)

2