Custom Printing

6.Choose the Media Type you want to print on. (If you’re not sure which setting to select, see the table on page 3-2.) The available media are limited by the predefined setting you chose in step 5. For example, you can’t use plain paper or transparencies with the ICM or ColorSync settings.

7.In Windows, check or change any necessary settings on the Paper and Layout (not available in Windows 3.1) tabs as described on page 2-12and page 2-22.

On a Macintosh, check or change any necessary settings in the Page Setup and Layout dialog boxes as described on page 2-17and page 2-29.

8.When you’re finished, click Print (Macintosh) or OK (Windows). If you’re using Windows, click any other buttons that your application uses for printing.

After you customize your print settings for a special project, you can save them as a group. Then you can reuse them whenever you print a similar project. See page 2-35for instructions.

Customizing Print Quality and Special Effects

If you need the maximum control over your photos, or you want to experiment with special effects, you can adjust individual settings in your printer software. Follow these steps:

1.Create your image or project in your application software.

2.Access the printer settings dialog box as described on page 1-2(Windows) or page 1-7 (Macintosh).

2-4