Tip: You can store partially used ink cartridges for up to 6 months.

Maintaining and Transporting the Printer 105

Replacing Ink Cartridges

Before you begin a large print job, you should check your ink levels. If one of your cartridges is low, you can replace it before you start. Or you can wait until the ink is expended, replace the cartridge, and then continue the job. However, it is best to replace a low ink cartridge before starting a large print job.

The easiest way to check ink levels is from the control panel:

 

 

1

2

3

4

5

6

7

8

 

 

 

 

 

 

 

 

 

 

 

Menu

 

3sec.

 

 

 

 

 

 

 

 

 

Full

 

 

 

 

 

 

 

 

 

Expended

1 Matte

 

 

 

 

 

 

 

 

 

8 Light

 

 

 

 

 

 

 

 

 

Light Black

Black/Photo

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Black

 

 

 

 

 

 

 

 

 

 

2 Cyan

4 Yellow

 

 

6 Light Cyan

7 Vivid Light

3 Vivid Magenta

5 Light Black

Magenta

 

When the red B ink light is flashing (and INK LOW is displayed on the LCD panel), the indicated cartridge is almost expended. Make sure you have a replacement cartridge. When the light stays on and REPLACE INK CRTG is displayed, the cartridge is expended. You must replace the cartridge before you can continue printing.

You can install any combination of 110 ml and 220 ml cartridges. It’s a good idea to keep a set of expended 110 ml cartridges on hand at all times in case you need to ship the printer.