114Maintaining and Transporting the Printer

•To enable printable pages, press the button until you see PAPER COUNTER, then press the Menu button. Press the button to select an option, then press the Menu button. Press the button when done.

•To change the units of measurement, press the button until you see UNIT, then press the Menu button. Press the button to switch from METER to FEET/INCH, then press Menu to select the units you want. Press the button when done.

•To change the default cutting pressure, press the button until you see CUT PRESSURE, then press the Menu button to display 100%. Press the button to decrease the pressure, or the button to increase it (in 1% increments). Press Menu to select the setting you want. Press the button when done.

•To run a super strong cleaning cycle, press the button until you see SSCL, then press the Menu button to display EXEC. Press Menu to start the cleaning cycle.

•To enable or disable roll paper feeding at power-on, press the button until you see ROLL PPR FEED, then press the Menu button. Press the button until you see the setting you want, then press the Menu button to select it.

•To return all control panel settings to their default values, press the

the button until you see DEFAULT PANEL, then press the Menu button to display EXEC. Press Menu again to restore the default settings.

•To check the ink cartridges, press the button until you see CRTG INFO MENU, then press Menu . Press the button to select each cartridge, then press Menu to view the information.

3.To exit the maintenance mode, turn off the printer by pressing the

P power button. Press the P power button again to turn on the printer in the normal operating mode.