Caution: Be careful not to touch the gears inside the printer.
To avoid damaging the components as well as the case, never use alcohol or thinners to clean the printer.
Be careful not to get water on the printer mechanism or electronic components.
Don’t use a hard or abrasive brush.
Don’t spray the inside of the printer with lubricants; unsuitable oils can damage the mechanism. Contact Epson if you think the printer needs lubrication.
WARNING: The printer weighs about 88 lb (40 kg) (without ink), and should be lifted by two people.
Caution: Do not turn off the printer by unplugging it or turning off a power strip. You will not be able to lock the print head, and ink will leak out of the reservoir, damaging the printer.
Maintaining and Transporting the Printer 119
Cleaning the PrinterTo keep your printer working at its best, you should clean it several times a year.
1.Make sure the printer is turned off and all its lights are off. Then unplug the power cord and disconnect the printer from your system.
2.Open the roll paper cover and remove the roll paper. Remove any sheets from the paper tray. Use a soft brush attachment to vacuum the paper tray.
3.If the paper path accidentally gets soiled with ink, gently clean it with a soft,
4.If the outer case is dirty, clean it with a soft, clean cloth dampened with mild detergent. Keep the ink cartridge compartment closed to prevent water from getting inside.
Transporting or Storing the PrinterIf you are moving the printer a short distance (for example, in the same building), raise the ink levers and have at least two people lift the printer.
To ship the printer, you must repack it using the original box and packing materials and secure it to a pallet. If you do not have these items, contact Epson to purchase them. Otherwise, the printer may be damaged beyond repair.
Preparing the Printer for Shipment
1.Turn off the printer and unplug the power cord.
2.Remove the following parts:
•All paper or other media
•Roll paper spindle
•Paper tray