Tip: If you experience difficulty with the toll-free line or your Unit ID number, call (562) 276-1305.

Caution: Using an improperly shielded cable—especially a cable more than 10 feet long—may cause the printer to malfunction.

Note: USB 2.0 is required to allow the printer to run at full speed.

Introduction 11

Before you call, make sure you have your Unit ID number, which is included with the Epson Preferred Limited Warranty Plan information that came with your printer. You’ll also need your printer serial number.

Epson also provides technical assistance 24 hours a day through the World Wide Web. You can reach Epson Support at epson.com/support. At this site, you can download drivers, firmware, and other files, look at product documentation, access troubleshooting information, and receive technical advice through e-mail.

You can purchase genuine Epson ink and paper from an Epson Professional Imaging authorized reseller. To find the nearest reseller, visit www.proimaging.epson.com (U.S. sales), www.epson.ca (Canadian sales), or call 800-GO-EPSON (800-463-7766). Or you can purchase online at www.proimaging.epson.com (U.S. sales) or www.epson.ca (Canadian sales).

Macintosh System Requirements

To use your printer in either a stand-alone or peer-to-peer network environment, your Macintosh® system should include the requirements listed below:

•Mac OS® X 10.4.9 or higher, or 10.5 or higher

•PowerPC® G5, Intel®, or higher processor

•At least 1GB of RAM (2GB or more recommended)

•At least 30GB of free hard disk space for software and processing files

•Quad-speed (4×) or faster CD-ROM or DVD drive for installing the printer software

•For USB connection: a compliant USB Hi-Speed 2.0 port and a shielded USB “AB” cable from Series A (computer) to Series B (printer), up to 10 feet long

•For network connection: Ethernet-equipped Macintosh® and a Category 6 compatible cable