110Maintaining and Transporting the Printer
Changing the black ink cartridge also consumes color ink, so you need to make sure that all of the cartridges contain enough ink before you begin.
If MNT TNK FULL appears on the LCD, you need to replace the maintenance tank. See page 117.
Draining the Old Ink
1.Make sure that READY appears on the LCD panel.
2.Press the Menu 
button.
3.Press the 
button until you see MAINTENANCE, and then press the Menu 
button.
4.Press the 
button until you see BK INK CHANGE, and then press the Menu 
button.
5.Press the Menu 
button again.
Note: If REPLACE
CNVRSION CRTG appears, press the
pause button. Remove the old conversion cartridge(s) from the left ink compartment, and then insert the new conversion cartridge(s). Go to step 4 to start again.
6.When RAISE THE RIGHT INK LEVER appears on the LCD, raise the ink lever on the right ink compartment.
7.When RAISE THE LEFT INK LEVER appears on the LCD, raise the ink lever on the left ink compartment.
8.When REMOVE INK CRTG appears, remove all four ink cartridges from the left ink compartment.
9.When INSTALL CNVRSION CRTG appears, insert the three conversion cartridges in the slots on the left ink compartment.
10.When LOWER THE LEFT INK LEVER appears on the LCD, lower the ink lever on the left ink compartment.
The printer starts draining ink and DRAINING XX% appears on the LCD. Wait until draining is complete.