Handling Paper and Other Media 49
Printing Trim Lines
You can print trim lines on the right edge of your pages (if you’re using auto cut) or on the right and bottom edge (if you’re not using auto cut). Follow these steps:
1.Press the Menu 
button. PRINTER SETUP appears on the display.
2.Press the Menu 
button again to display PLATEN GAP.
3.Press the 
button to display PAGE LINE.
4.Press the Menu 
button.
5.Press the 
button to highlight ON.
6.Press the Menu 
button to save the setting. An asterisk appears next to ON.
7.Press the 
pause button to exit the menu.
You can also specify trim lines from your printer driver software. For instructions, see page 64 (Mac OS X) or page 82 (Windows).
Adjusting the Platen Gap for Thick or Thin Paper
When you print on unusually thick or thin paper, you may need to adjust the platen gap setting. Normally, the STANDARD setting allows the printer to adjust automatically. However, if print quality is not satisfactory when using very thin or very thick stock, you may need to change this setting. Follow these steps:
1.Press the Menu 
button. PRINTER SETUP appears on the display.
2.Press the Menu 
button again to display PLATEN GAP.
3.Press the Menu 
button. STANDARD is displayed as the current setting.
4.Use the 
and 
buttons to change the setting. (STANDARD is the default setting; you can also choose NARROW, WIDE, WIDER, or
WIDEST.)