52Handling Paper and Other Media

•DRYING TIME lets you print with non-Epson media and avoid smearing the ink. You can make the print head wait up to 10 seconds after each pass to allow ink to dry on the page.

•SUCTION lets you decrease the paper suction level when printing on thin media (under 12 lb), such as drafting paper or backlight film.

•M/W ADJ adjusts the intensity of the MicroWeave® pattern. This improves print quality, but lowers printing speed.

10.When done, press the pause button.

Selecting Custom Paper Configurations

Once you have created a paper configuration, you can select it whenever you print on that paper:

1.Press the Menu button, then press the button to display CUSTOM PAPER. Press the Menu button again.

2.Press the button to display PAPER NUMBER, then press the Menu button.

3.Press the button to select the configuration number that you want to use. If you select STANDARD, the printer uses the driver settings. If you select a number from 1 to 10, the control panel settings override the driver settings.

4.Press the Menu button, then press the pause button to exit the menu.

5.The configuration number you selected is displayed on the LCD.