Epson RX600 Printing From a Digital Camera

Printing From a Digital Camera

PictBridge and USB Direct Print allow you to print your photos when connecting your camera directly to the Stylus Photo RX600.

1.Remove any memory cards from the Stylus Photo RX600. (If you leave a card in the printer, photos will be read from the memory card in the Stylus Photo RX600 instead of your camera.)

2.Connect the USB cable from your camera to the EXT I/F USB port on the front of the Stylus Photo RX600. Some digital cameras require a special USB cable; if so, be sure to use the one that came with the camera.

EXT/IF USB port

3.Turn on the Stylus Photo RX600 and your camera. After a moment, the Stylus Photo RX600 reads and counts the number of photos in your camera.

4.Press the Setup button to set the RX600 to Setup mode.

5.Use the d button to highlight Direct print image set and press OK.

6.Choose the Paper Type, Paper Size, Layout, Resolution, and other print settings (see page 85 for details).

7.When you have finished selecting print settings, press OK.

8.Use the camera controls to print your photos. See your camera documentation for printing instructions.

Note:

If your camera is not compatible with PictBridge or USB Direct Print, you’ll see a message saying that the connected device cannot be used. Epson cannot guarantee the compatibility of any cameras.

112 Printing From Other Devices