8.When you’re finished you see a Head alignment completed message on the LCD screen. Press OK to return to the Setup Menu.

Transporting the Stylus Photo RX600

If you move your Stylus Photo RX600 some distance, you need to prepare it for transportation in its original box or one of a similar size.

Caution:

To avoid damage, always leave the ink cartridges installed when transporting the Stylus Photo RX600. Never transport or store the Stylus Photo RX600 on its side or in a tilted or upside-down position.

1.Press the P On button to turn on the Stylus Photo RX600. Wait until the scanner carriage moves to the home position (toward the left side) and the print head locks in the far right position. Then turn the Stylus Photo RX600 off.

2.Open the scanner lid and slide the transportation lock to the locked position.

Caution:

Be sure to move the transportation lock back to the unlocked position after installing the Stylus Photo RX600 in its new location.

3.Close the scanner lid.

4.Unplug the power cord from the electrical outlet. Then disconnect the USB cable from your computer.

Transporting the Stylus Photo RX600 129