2.Turn on the Stylus Photo RX600 and your storage device. After a moment, the Stylus Photo RX600 reads and counts the number of photos on your device. When it’s done, your images are available for printing.

See “Printing From a Memory Card” on page 82 for printing instructions.

Note:

If you’ve backed up your images on a Zip disk, CD, or other storage device (see below), they’re stored in folders (001, 002, etc.). Use the u and d buttons on the front of the Stylus Photo RX600 to highlight the folder you want to open, then press OK to open it.

Saving Photos to a CD or Zip Disk

You can save image files from your camera’s memory card to a Zip disk or CD-R/RW using only the Stylus Photo RX600. This lets you delete the images on your memory card and reuse it without losing your original images. Once your images are stored on a disk or CD, you can retrieve them at any time for printing.

To save images, you need a 100MB or 250MB Iomega Zip drive or CD-R/RW drive (with a USB connection), available at many computer stores. The drive must provide its own power. We recommend using USB 2.0-compatible (high-speed) CD-R/RW drives.

Note:

If you insert a Macintosh disk into a Zip drive attached to the Stylus Photo RX600, it automatically formats it, so be sure to use a disk that is empty or not formatted, or one containing data you don’t mind losing. (You are prompted before any data is erased.)

1.Make sure the Stylus Photo RX600 is turned on and the memory card containing your photos is inserted in it.

2.If the Stylus Photo RX600 is connected to your computer, unplug the USB cable that connects it to your computer, or turn off your computer.

114 Printing From Other Devices