Always turn the Stylus Photo RX600 off using the P On button. Don’t turn off the power using a switch on a power strip or unplug the

Stylus Photo RX600 until the P On light is off and the message Turning off disappears from the LCD panel.

Do not block or cover openings in the Stylus Photo RX600 case or insert objects through the slots.

Except as specifically explained in your documentation, do not attempt to service the Stylus Photo RX600 yourself.

Unplug the Stylus Photo RX600 and refer servicing to qualified service personnel under the following conditions: if the power cord or plug is damaged; if liquid has entered the product; if the product has been dropped or the case damaged; if the product does not operate normally or exhibits a distinct change in performance. Adjust only those controls that are covered by the operating instructions.

Before transporting the Stylus Photo RX600, make sure the print head is capped in the far right position, the ink cartridges are in place, and the scanner is secured by the transportation lock.

When storing or transporting the Stylus Photo RX600, do not tilt it, stand it on its side, or turn it upside down. Otherwise ink may leak from the cartridges.

The Stylus Photo RX600 includes a lamp component that contains mercury. Please consult your state and local regulations regarding disposal or recycling. Do not put in the trash.

Do not remove the memory card or turn off this product while the computer and memory card are communicating (when the memory card light is flashing).

Use only memory cards compatible with the Stylus Photo RX600.

See the documentation for your memory card for specific instructions about how to use the card.

Ink Cartridge Safety Instructions

Leave the ink cartridges installed. Removing the cartridges can dehydrate the print head and may prevent the Stylus Photo RX600 from printing.

Keep ink cartridges out of the reach of children and do not drink the ink.

Important Safety Instructions 153