Scan Quality ProblemsYour scanned image is blurry or distorted.

■Make sure the document is placed flat against the scanner glass. If only part of the image is blurred, your document may be wrinkled or warped.

■Try scanning at a higher resolution, and make sure the correct Image Type, Exposure, and Gamma setting are selected in Epson Scan. Click the Help button on the Epson Scan window for details.

■Clean the scanner glass with a soft, dry, lint-free cloth (paper towels are not recommended). If the glass is still

not clean, use a small amount of glass cleaner on a soft cloth. Make sure you wipe off any remaining cleaner. Don’t spray glass cleaner directly on the glass.

■Make sure the Stylus Photo RX600 is not tilted or placed on an unstable or uneven surface.

Your image is too dark.

■Try adjusting the brightness with your application software. Also check the brightness and contrast values of your monitor.

■The dark area around negative film is perceived as white, altering the exposure of the scanning area and causing your scans to appear darker. Set the correct color by adjusting the border (marquee) so only your image is selected. Then scan again. Click Help in the Epson Scan window for details.

■Change the Display Gamma setting and check the Destination setting in Epson Scan. Click Help in the Epson Scan window for details.

Problems and Solutions 143