Lightening or Darkening Copies

1.Press the Menu button to display the Copy Menu on the LCD screen.

2.Press the d button to choose Copy Density.

3.Press the l button to lighten or the r button to darken your copies.

4.Press the OK button to go back to the additional copy settings.

Saving and Reusing Copy Settings

You can save one set of custom copy settings so you can quickly reuse it for a similar copying job (for example, 5 × 7-inch photos on Premium Glossy Photo paper). You can then “reprint” photos by pressing a single button.

1.After selecting settings, press and hold the Recall button until you see The current setting has been saved on the LCD screen. Then press OK.

If you want to save a different group of settings, repeat step 1. This replaces your previously saved settings.

2.To use your saved settings, press the Recall button until you see Recalled on the LCD screen. Then press OK.

Canceling Copies

To cancel a job in progress, press the y Stop button. Canceling appears on the LCD screen and your page is ejected.

Restoring Default Settings

If you want to reset copy and print settings to their original default settings, follow these steps:

1.Press the Setup button.

2.Use the u and d buttons to choose Restore to Factory Settings.

3.Press OK, then press OK again to restore your settings.

4.You see a confirmation message that settings have been restored. Press OK.

28Copying