Connecting the Bluetooth Photo Print Adapter

Make sure the Stylus Photo RX600 is not currently printing. Plug the Bluetooth Photo Print adapter into the EXT. I/F USB port on the front of the Stylus Photo RX600, then fold the front section up or down.

Caution:

Do not connect the Bluetooth Photo Print adapter while the printer is printing. Doing so may cause the printer to malfunction.

The Bluetooth Photo Print adapter light comes on for one second. If the light does not turn on, disconnect the adapter from the printer (as described below), then reconnect it.

Disconnecting the Bluetooth Photo Print Adapter

Fold the Bluetooth adapter up or down, then pull it out of the EXT. I/F USB port, as shown below.

Caution:

Do not remove the adapter while it is communicating with another device or while the printer is printing (while the blue light is flashing). Doing so may cause the printer to malfunction. Do not remove the adapter by pulling on the upper section or you may damage the product.

Using a Bluetooth Device 117