Placing 35 mm Film Strips on the Film Holder
1. Remove the film cover for the film strip holder.
2.Slide your film strip into the holder with the duller (emulsion) side facing up. The top of the images should be facing the outside edge of the film holder and the images should be reversed.
3.Replace the film cover. (It should snap into place.)
4.Position the film holder so that the 35 mm film strip faces the center of the scanner glass. The positioning posts on the film holder fit in two small holes near the scanner lid, as shown.
5. Continue on page 75 to scan your film.
Scanning 35 mm Slides and Film 73