Scanning Using the RX600 Buttons

You can use the buttons on the Stylus Photo RX600 to scan an image to your computer, or to send an e-mail with a scanned image attached.

Note:

Both Epson Scan and Epson Smart Panel must be installed on your computer to scan to your computer or to attach to an e-mail.

Scanning to Your Computer

1.Make sure the Stylus Photo RX600 is connected to your computer.

2.Open the scanner lid.

3.Place your photo face down on the glass in the upper left corner about 0.1 inch from the edges, as shown.

0.1 in

0.1 in

Move the document in about 0.1 inch from the edges

Note:

If you place your photo or document against the edge of the glass, the edges of your photo or document may not be copied.

4.Close the scanner lid.

5.Press the Scan button to set the Stylus Photo RX600 to Scan mode.

6.Use the u and d buttons to choose Scan to PC, then press the OK button.

76Scanning to a Computer