1.Press the Film Print button to set the Stylus Photo RX600 to Film Print mode.
2.Use the u and d buttons to choose Custom Print, then press the OK button.
3.You see the film options on the right. Use the l and r buttons to choose your film or slide type, then press the OK button.
4.After the film or slides are scanned, choose the picture(s) you want to print with the l and r buttons, then choose the number of copies for each photo with the u and d buttons.
5.Press the OK button.
6.Press the u and d buttons to highlight Paper Type, then press the l and r buttons to choose the type of paper that is loaded in the printer. (If you’re not sure about the paper type, see the table on page 87.)
Note:
It’s important to select the correct Paper Type setting for the paper you’re using, or the print quality may not be what you expect.
7.Press the u and d buttons to highlight Paper Size, then use the l and r buttons to select the size of paper you’ve loaded.
8.Use the u and d buttons to highlight Resolution, then use the l and r buttons to choose Photo or Best Photo.
9.To restore color from faded images, use the u and d buttons to highlight Restoration, then use the l and r buttons to choose On.
10.Use the u and d buttons to highlight Layout, then use the l and r buttons to select one of the following:
BorderFree: One photo per sheet, borderless; fits the photo lengthwise on the paper
With Border: One photo per sheet, with borders around the edges
11.When you’re done adjusting print settings, press the x Color button or x B&W button. Your print job begins printing.
Note:
To cancel a print job while printing, press the y Stop button.
Printing from Film or Slides 95