Tip:
You can restore color in your old photos. See page 67 for details.
1.Open the scanner lid.
2.Place your photo or document face down on the glass in the upper left corner about 0.1 inch from the edges, as shown.
You can also place additional small documents or photos and scan them at the same time.
0.1 in
0.1 in
Move the photo or document in about 0.1 inch from the edges
3. Close the scanner lid.
Note:
If you place your photo or document against the edge of the glass, the edges of your photo or document may not be copied.
To scan a thick document, you can remove the scanner lid. Turn off the Stylus Photo RX600, and open the scanner lid completely. Then disconnect the cord from the TPU connector and pull the lid straight up. Turn on the Stylus Photo RX600 and gently press down the original to keep it flat on the scanner glass as you scan. When you’re finished, be sure to turn off the Stylus Photo RX600 before replacing the scanner lid and plugging in the connector.
62Scanning to a Computer