Printing From a CD Drive or Zip Disk

If you have one of the following devices, you can print from it to your Stylus Photo RX600 using a USB cable:

USB CD/DVD burners and drives (see http://support.epson.com for a list of compatible drives); USB 2.0 (high-speed) drives are recommended

100MB or 250MB Iomega Zip drives with an external power adapter

Note:

If your drive is not compatible with the Stylus Photo RX600, you’ll see a message saying that the connected device cannot be used. Epson cannot guarantee the compatibility of any drives.

If you are using a Zip disk, it must be formatted as a FAT16 disk. Also, if you insert a Macintosh disk into a Zip drive attached to the Stylus Photo RX600, it automatically formats it, so be sure to use a disk that is empty or not formatted, or one containing data you don’t mind losing. (You are prompted before any data is erased.)

Tip:

When you connect a CD-ROM drive, you can also print photos from Picture CDs that you get from your photo lab.

Follow these steps to connect your storage device:

1.Connect the USB cable from your storage device to the EXT I/F USB port on the front of the Stylus Photo RX600.

EXT/IF USB port

Printing From a CD Drive or Zip Disk 113