Copying

You can use your Stylus Photo RX600 by itself, just like a photocopier, or copy with a computer using the Epson Smart Panel software.

“Copying Without a Computer” below

“Copying With a Computer” on page 29

Copying Without a Computer

1.Press the P On button to turn on the Stylus Photo RX600.

2.Open the scanner lid.

3.Place your photo or document face down on the glass in the upper left corner about 0.1 inch from the edges, as shown.

0.1 in

0.1 in

Move the photo or document in about 0.1 inch from the edges

4. Close the scanner lid.

21