Epson SEIJ98006 manual Adjustments, Preliminary Operation

EPSON Stylus Color 900 Revision C

5.2 Adjustments

5.If the indicated model name is Stylus Color 900 only, press Enter key.

This section describes the procedure for each adjustment. Be sure to observe the CAUTION and tables in Section 5.1.1 before starting adjustments.

5.2.1 Preliminary Operation

Perform the preliminary operation, which is required prior to actual adjustment operation, by following the steps below.

NOTE:￿

If we OEM this product in future, there will be a possibility that more model names are added to the option. In this case, be sure to select the model name you are dealing with correctly.

The command required to write adjustment value for each adjustment includes a model-unique parameter, which is called R-code. The purpose of selecting the model name is to define the parameter which is specific to the model.

1.Connect the PC and printer with PRIF4.

2.Turn the printer on.

6. The following screen appears.

3. Launch the service program (SC900.EXE) attached to the service						< * > < * > < * >		S e r v ic e
manual for the Stylus Color 900.
4. The following screen appears.							S e le c t t h e d e s t
						E A I	E I S	E S P
						E A I ( C AENIABD A ) E H K
						E A I ( L A ET UI NL ( 1 2 E0 HV K) ( P H U
						E A I ( L A ET UI NL ( 2 42 E0 TV T)
						E D G	E U L ( 2 3 E0 UV R /O N L
	< * > < * > < * >		S e r v ic e			E D G ( N LESAPL)		E F S
	P le a s e s e le c t t h e			m o d e l n a m e .
						E s c : P r e v io u s			U p /
		S t y lu s	C O L O R 9	0 0
						Figure 5-2. Destination Selection Screen
					7. From the option in screen (Figure 5-2),select the destination which
	E s c : Q u it		U p / D o w n a r r o w s :		S e le c t		E n t e r : O K
					applies to the model on which you are making adjustments, then
					press Enter.
	Figure 5-1. Screen after Start-up Sequence

Adjustment Adjustments 134