Epson SEIJ98006 manual PF Roller Removal, 46. Paper Hold Lever Removal, 48. Tension Spring Removal

EPSON Stylus Color 900 Revision C

4.2.7.15 PF Roller Removal

1.Remove the platen. (See Section 4.2.7.14.)

2.Remove the screw securing the paper support lever to the printer mechanism, and remove the paper hold lever along with the stay.

Screw Securing the Paper Support Lever

Figure 4-46. Paper Hold Lever Removal

3.From the back of the printer mechanism, release the torsion springs securing the paper guides (upper) to release the paper guides (upper).

Torsion Spring

(six springs in total)

Paper Guides (Upper)

Figure 4-47. Releasing the Paper Guide (Upper)

4.Pull all the paper guides (upper) out to the front side of the printer mechanism (paper ejection side).

CA U T WhenI O N installing the paper guide located on the left

edge (HP side), be sure to insert it from the rear side of the printer mechanism: because it has a cutout in which the actuator for the PE sensor falls, and if the paper guide is removed to the rear, the actuator will be damaged.

5.Remove the tension spring stretching the encoder belt from the back of the printer mechanism.

Tension Spring

Figure 4-48. Tension Spring Removal

6.Remove two screws securing the top frame and remove the top frame.

Disassembly and Assembly Disassembly Procedures 128