Epson SEIJ98006 manual Improperly? Is any of the paper load

EPSON Stylus Color 900							Revision C
	Table 3-7. Remedies for Paper Jam Error (continued)				Table 3-8. Remedies for Paper Jam Error (continued)
Step		Check Points	Actions	Step	Check Points	Actions
5	•	Is the PE sensor	Referring to Step 3 in Section 3.1.1.1 “Remedies	7	Is the ASF installed	• Check the ASF installation at the following 2
		actuator acting	for Paper Out Error”, check the sensor condition.		improperly?	points: View A and View B in the figure below.
		improperly?			Is any of the paper load	V ie w	B
	• Is the sensor base
					sub rollers fixed
		floating?			improperly?
6	•	Is the PE sensor	Referring to Step 4 in Section 3.1.1.1 “Remedies
		defective?	for Paper Out Error”, check the sensor condition.				V ie w A
	•	Is the encoder	Then, verify the encoder sensor condition by
		defective?	checking the following points for proper connection
			and electrical continuity, since checking the signal
			directly from the encoder is impossible.
			1. Connection of the connector 1			P r o t r u s io n	is s

2.Connection of the connector 2

3.Electrical continuity of the cable.

C a r r ia g e v ie w e d f r o m t h e b a c k
H e a d s u r f a c e	V i e w B
	D is c o n n

C h e c k		f o r
C o n n e c t o r	1		V i e w A
c o n t in u it y .
C o n n e c t o r			2

• Viewing the printer from the back, check that all of the six torsion springs securing the paper load sub rollers are properly installed.

T o p F rTaemnes i

Troubleshooting Overview 84