Epson SEIJ98006 Regardless of the value you have input, the center value selected, Revision C

EPSON Stylus Color 900 Revision C

11.Select “Adjust” in the screen.

12.The following screen appears.

15.As the Up/Down Arrow key is pressed, the value (shown in blue in the figure) increases/decreases. So you can select the desirable value.

NOTE:

Regardless of the value you have input, the center value (selected

M o d e s e l e c t i o n o f B i - d a d j u s t m e n t

value) in the next Bi-D pattern sample will be “0”. The value in the range from -34 to 34 can be input.

		V a r i a b l e - 1	D
		V a r i a b l e - 2	D	16. When the desirable value is selected, press the Enter key. The
		N o r m a l D o t
				following screen appears.
	E S C : P r e v io u s U p / D o w n a r r o w s : S e					r : O K
						V a r ia b le - 1 D o t
					A s	t h e v a+r4iahabsleb-e1e nD o
Figure 5-35. Bi-D Adjustment Mode Selection Screen

13.Select “Variable-1 Dot”. (If the center value for the Variable-1 Dot pattern has the completely aligned lines, you can select “Variable-2 Dot” instead.)

14. The following screen appears.

E S C : P r e v io u

V a r ia b le - 1 D o t B i - D

S e le c t a n a d ju s t m e n 4

E S C : P r e v io u s U p / D o w n

Figure 5-37. Screen after the Adjustment Value has been Written

a d ju s t m e n t

17.Press the ESC key to return to the Bi-D Adjustment mode selection screen (Figure 5-35).

18.Select “Variable-2 Dot”. (If the center value for the Variable-2 Dot pattern has the completely aligned lines, you can select “Normal Dot” instead.)

a r r o w s : S e le c t E n t e r : O K

19. The following screen appears.

Figure 5-36. Adjustment Value Input Screen (Variable-1)

Adjustment Adjustments 150