To adjust tl_c lAD settling:
1. Light burner and set control knob for low flame.
2.Remove control knob from valve stem.
CAUTION:
Never use a metal blade to pry knob off. If knob cannot be easily removed, tuck the folds of a cloth dishtowel under the knob skirt and pull the towel upward with steady, even pressure.
3.Insert a slender,
into the recess | at | center | of | valve | stem |
| TOINCREASEFLAME | |
and engage | blade | with slot | in adjusting | _/_ | SJZE | |||
|
|
|
|
|
|
| COUNTERCLOCKWISE | |
screw. |
|
|
|
|
|
| CLOCKWISE |
|
|
|
|
|
|
|
| TO REDUCE |
|
4. Turn center stem adjusting | screw slightly | FLAMES_ZE |
| |||||
tO set flame size. Note: Turn clockwise |
|
| ||||||
to reduce or | counterclockwise | to in- |
|
| ||||
crease flame | size. |
|
|
|
| VALVE |
| |
|
|
|
|
|
|
|
| |
5. Replace control | knob when | adjustment |
| |||||
is completed.
Proper adjustment will produce a stable, steady blue flame of minimum size. The final adjustment should be checked by turning knob from Hi to Lo several times without extinguishing the flame.
This adjustment, at the Lo setting, will automatically provide the proper flame size at Meal setting.
11
