Epson SEIJ98006 manual Adjustment Adjustments 151

EPSON Stylus Color 900 Revision C

22. Press the ESC key to return to the Bi-D Adjustment mode selection

			screen (Figure 5-35).
	V a r ia b le - 2 D o t	B i - D a d ju s t m e n t
			23. Select “Normal Dot”. (If the center value for the Normal Dot pattern
	S e le c t a n a d ju s t m e n		has the completely aligned lines, you can finish this adjustment.)
	4
			24. The following screen appears.
	E S C : P r e v io u s U p / D o w n a r r o w s : S e le c			N o r m a l ODKo t B i - D
Figure 5-38. Adjustment Value Input Screen (Variable-2)				S e le c t a n a d ju s t m e n
				4
20. As the Up/Down Arrow key is pressed, the value (shown in blue in
the figure) increases/decreases. So you can select the desirable
value.
NOTE:				E S C : P r e v io u s	U p /
Regardless of the value you have input, the center value (selected
value) in the next Bi-D pattern sample will be “0”. The value in the			Figure 5-40. Adjustment Value Input Screen (Normal Dot)
range from -34 to 34 can be input.
21. When the desirable value is selected, press the Enter key. The			25. As the Up/Down Arrow key is pressed, the value (shown in blue in
following screen appears.			the figure) increases/decreases. So you can select the desirable
			value.
			NOTE:
	N o r m a l D o t B i - D a d ju s t m e n t
	A s t h e N+o4hr ma sa lb De oe tn d		Regardless of the value you have input, the center value (selected
			value) in the next Bi-D pattern sample will be “0”. The value in the
			range from -34 to 34 can be input.
			26. When the desirable value is selected, press the Enter key.
	E S C : P r e v io u s
Figure 5-39. Screen after the Adjustment Value has been Written

Adjustment Adjustments 151