Epson user manual TM-U375P

Your printer comes with inch-type hexagonal lock screws installed. If you plan to use an interface cable that requires millimeter-type lock screws, replace the inch-type screws with the enclosed millimeter-type screws by using a hex screwdriver (5 mm). To distinguish the two types of screws, see the figure below.

Notch (one or more lines)

Inch-typeMillimeter-type

3. Plug the other end of the cable into the computer.

TM-U375P

You need an appropriate parallel interface cable to connect your computer to the printer.

1.Make sure that the printer and the computer are turned off. Then plug the cable into the connector on the printer, as shown.

Setting Up the Printer 1-5